R3303-HP HSR6800 Routers High Availability Command Reference
192
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no slot number is specified for the router, all BFD session information is displayed. If the all keyword is
specified, the command displays the detailed BFD session information on the card (or the MPU) in the
specified slot, including those sessions not maintained by the card. (In standalone mode.)
If no chassis number or slot number is specified, the BFD session information of call cards on all IRF
member devices is displayed. If the all keyword is specified, the command displays the detailed BFD
session information on the card (or the MPU) in the specified slot on the specified IRF member device,
including those sessions not maintained by the card. (In IRF mode.)
Examples
# Display detailed information about the BFD sessions maintained by all the cards on the device (in
standalone mode).
<Sysname> display bfd session verbose
Total session number: 2 Up session number: 2 Init mode: Active
IPv4 session working under Ctrl mode:
Local Discr: 1 Remote Discr: 1
Source IP: 192.168.11.11 Destination IP: 192.168.11.10
Session State: Up Interface: GigabitEthernet1/0/1
Min Trans Inter: 200ms Act Trans Inter: 200ms
Min Recv Inter: 200ms Act Detect Inter: 1000ms
Running Up for: 00:02:36 Auth mode: None
Connect Type: Direct Board Num: 6
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Local Discr: 2 Remote Discr: 2
Source IP: 192.168.12.11 Destination IP: 192.168.12.10
Session State: Up Interface: GigabitEthernet1/0/2
Min Trans Inter: 200ms Act Trans Inter: 600ms
Min Recv Inter: 200ms Act Detect Inter: 1000ms
Running Up for: 00:02:36 Auth mode: None
Connect Type: Direct Board Num: 7
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
# Display detailed information about the BFD sessions maintained by the card in slot 3 on chassis 1 (in
IRF mode).
<Sysname> display bfd session chassis 1 slot 3 verbose
IPv4 session working under Ctrl mode:
Local Discr: 1 Remote Discr: 1