R3303-HP HSR6800 Routers High Availability Command Reference

15
Field Descri
p
tion
Link Status Link status.
OAMLocalErrFra
meEvent
Information about remote errored frame events:
• Event Time Stamp—Time when an errored frame event occurred (in 100 milliseconds).
• Errored Frame Window—Error frame detection interval (in 100 milliseconds).
• Errored Frame Threshold—Error threshold that triggers an errored frame event.
• Errored Frame—Number of detected error frames over the specific detection interval.
• Error Running Total—Total number of error frames.
• Event Running Total—Total number of errored frame events that have occurred.
Related commands
• display oam configuration
• reset oam
oam enable
Use oam enable to enable Ethernet OAM on the Ethernet port.
Use undo oam enable to disable Ethernet OAM on the Ethernet port.
Syntax
oam enable
undo oam enable
Default
Ethernet OAM is disabled on all Ethernet ports.
Views
Layer 2 Ethernet port view
Default command level
2: System level
Examples
# Enable OAM on port GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] oam enable
oam errored-frame period
Use oam errored-frame period to set the errored frame event detection interval.
Use undo oam errored-frame period to restore the default.
Syntax
oam errored-frame period period-value
undo oam errored-frame period