R3303-HP HSR6800 Routers High Availability Command Reference

22
Default
Ethernet OAM remote loopback is disabled on an Ethernet port.
Views
System view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and
can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.
Examples
# Configure the active Ethernet OAM mode and enable Ethernet OAM on GigabitEthernet 3/0/1, and
then enable Ethernet OAM remote loopback on GigabitEthernet 3/0/1 in system view.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] oam mode active
[Sysname-GigabitEthernet3/0/1] oam enable
[Sysname-GigabitEthernet3/0/1] quit
[Sysname] oam loopback interface gigabitethernet 3/0/1
Related commands
• oam enable
• oam loopback
• oam loopback interface (user view)
• oam mode
oam loopback interface (user view)
Use oam loopback interface to enable Ethernet OAM remote loopback on an Ethernet port in user view.
Use undo oam loopback interface to disable Ethernet OAM remote loopback on an Ethernet port in user
view.
Syntax
oam loopback interface interface-type interface-number
undo oam loopback interface interface-type interface-number
Default
Ethernet OAM remote loopback is disabled on an Ethernet port.
Views
User view
Default command level
1: Monitor level