R3303-HP HSR6800 Routers High Availability Command Reference

23
Parameters
interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and
can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.
Examples
# Configure the active Ethernet OAM mode and enable Ethernet OAM on GigabitEthernet 3/0/1, and
then enable Ethernet OAM remote loopback on GigabitEthernet 3/0/1 in user view.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] oam mode active
[Sysname-GigabitEthernet3/0/1] oam enable
[Sysname-GigabitEthernet3/0/1] return
<Sysname> oam loopback interface gigabitethernet 3/0/1
Related commands
• oam enable
• oam loopback
• oam loopback interface (system view)
• oam mode
oam loopback reject-request
Use oam loopback reject-request to configure a port to reject the Ethernet OAM remote loopback request
from a remote port.
Use undo oam loopback reject-request to restore the default.
Syntax
oam loopback reject-request
undo oam loopback reject-request
Default
A port does not reject the Ethernet OAM remote loopback request from a remote port.
Views
Layer 2 Ethernet port view
Default command level
2: System level
Examples
# Configure GigabitEthernet 3/0/1 to reject the Ethernet OAM remote loopback request from a remote
port.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] oam loopback reject-request