R3303-HP HSR6800 Routers High Availability Command Reference

48
Level: 4 Maintenance domain: mdtest_4
Level: 5 Maintenance domain: mdtest_5
Level: 6 Maintenance domain: mdtest_6
Level: 7 Maintenance domain: mdtest_7
Table 15 Command output
Field Descri
p
tion
8 maintenance domain(s) configured Number of MDs configured.
Level MD level, each level allows only one MD.
Maintenance domain MD name.
display cfd mep
Use display cfd mep to display the attribute and operating information of a MEP.
Syntax
display cfd mep mep-id service-instance instance-id [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
mep mep-id: Specifies a MEP by its ID in the range of 1 to 8191.
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the attribute and operating information of MEP 50 in service instance 1.
<Sysname> display cfd mep 50 service-instance 1
Interface: GigabitEthernet3/0/2
Maintenance domain: mdtest_1
Maintenance association: matest_1
Level: 1 VLAN: 1 Direction: Outbound
Administrative state: Active CCM send: Enable
FNG state: FNG_DEFECT_REPORTED
CCM:
Current state: CCI_WAITING