R3303-HP HSR6800 Routers High Availability Command Reference

50
Field Descri
p
tion
Current state
State of CCMs sent:
• CCI_IDLE—Initial state.
• CCI_WAITING—Sending state.
Interval Interval to send CCM.
SendCCM
Number of CCMs that have been sent by the MEPs.
If this field is not supported, a hyphen (-) is displayed.
Loopback Information related to Loopback.
NextSeqNumber Sequence number of the next LBM to be sent.
SendLBR
Number of LBRs that have been sent. If the MEP is inward-facing, the number
of LBRs will not be counted.
ReceiveInOrderLBR Number of LBR messages received in correct sequence.
ReceiveOutOrderLBR Number of LBR messages received out of order.
Linktrace Information related to linktrace.
NextSeqNumber Sequence number of the next LTM to be sent.
SendLTR
Number of LTRs sent. If the MEP is inward-facing, the number of LTRs will not
be counted.
ReceiveLTM Number of LTMs received.
No CCM from some remote
MEPs is received.
Failure to receive CCMs from some remote MEPs. (This information is
displayed only when some CCMs are lost.)
One or more streams of error
CCMs is received. The
last-received CCM:
Display the content of the last error CCM when one or more error CCMs are
received. (This information is displayed only when error CCMs is/are
received.)
Maintenance domain
MD of the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
Maintenance association
MA of the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
MEP
ID of the MEP that sent the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
Sequence Number
Sequence number of the last error CCM.
If this field is not supported, a hyphen (-) is displayed.
Received Time Time when the last error CCM is received.
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Cross-connect CCMs are received, and the content of the last cross-connect
CCM is displayed. (This information is displayed only when cross-connect
CCMs is/are received.)
Some other MEPs are
transmitting the RDI bit.
CCMs with the RDI flag bits set are received from other MEPs. (This
information is displayed only when this type of CCMs is/are received.)