R3303-HP HSR6800 Routers High Availability Command Reference

51
display cfd meplist
Use display cfd meplist to display the MEP list in a service instance.
Syntax
display cfd meplist [ service-instance instance-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the service instance ID is not specified, this command displays MEP lists in all service instances.
Examples
# Display the MEP list in service instance 5.
<Sysname> display cfd meplist service-instance 5
Service instance: 5
MEP list: 1 to 20, 30, 50.
display cfd mp
Use display cfd mp to display the MP information.
Syntax
display cfd mp [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the MP information on a port specified by its port
type and port number.