R3303-HP HSR6800 Routers High Availability Command Reference

54
Table 18 Command output
Field Descri
p
tion
MEP ID ID of the remote MED.
MAC Address
MAC address of the remote MEP device.
If this field is not supported, a hyphen (-) is displayed.
State Running state of the remote MEP: OK or FAILED.
Time Time when the remote MEP entered the FAILED or OK state for the last time.
MAC Status
State of the port indicated by the last CCM received from the remote MEP: UP
or DOWN.
If this field is not supported, a hyphen (-) is displayed.
display cfd service-instance
Use display cfd service-instance to display the configuration information of service instance.
Syntax
display cfd service-instance [ instance-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
instance-id: Service instance ID in the range of 1 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Without specifying the service instance ID, the command will display the configuration information of all
service instances.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5 VLAN: 5 MIP rule: None CCM interval: 1s