R3303-HP HSR6800 Routers High Availability Command Reference

60
Usage guidelines
If you do not provide the interface-type interface-number argument, this command displays the statistics
on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics
Interface GigabitEthernet3/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Interface GigabitEthernet3/0/2
Packets sent : 7
Packets received : 7
Invalid packets received : 3
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 4
# Display the statistics on the DLDP packets passing through GigabitEthernet 3/0/1.
<Sysname> display dldp statistics gigabitethernet 3/0/1
Interface GigabitEthernet3/0/1
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Table 22 Command output
Field Descri
p
tion
Interface Port index.
Packets sent Total number of DLDP packets sent.
Packets received Total number of DLDP packets received.
Invalid packets received Number of the invalid packets received.
Loop packets received Number of the loopback packets received.
Authentication failed packets received Number of the received packets that failed to pass the authentication.
Valid packets received Number of the valid packets received.
dldp authentication-mode
Use dldp authentication-mode to configure DLDP authentication.