R3303-HP HSR6800 Routers High Availability Command Reference

62
Default
The setting of the DelayDown timer is 1 second.
Views
System view
Default command level
2: System level
Parameters
Time: Sets the DelayDown timer in the range of 1 to 5 (in seconds).
Usage guidelines
The DelayDown timer configured by using this command applies to all DLDP-enabled ports.
Examples
# Set the DelayDown timer to 2 seconds.
<Sysname> system-view
[Sysname] dldp delaydown-timer 2
dldp enable
Use dldp enable to enable DLDP.
Use undo dldp enable to disable DLDP.
Syntax
dldp enable
undo dldp enable
Default
DLDP is disabled both globally and on each port.
Views
System view, Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
When executed in system view, this command enables/disables DLDP globally. When executed in
Ethernet interface view, this command enables/disables DLDP on the current port. When executed in
port group view, this command enables/disables DLDP on all the ports in the port group.
DLDP can take effect only after you enable it globally and then on a port.
Examples
# Enable DLDP globally, and then enable DLDP on GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] dldp enable
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] dldp enable