R3303-HP HSR6800 Routers High Availability Command Reference

67
RPR configuration commands
bandwidth
Use bandwidth to set the maximum available bandwidth for the RPR logical interface or RPR physical
port.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
Layer 3 RPR logical interface view, RPRPOS interface view
Default command level
2: System level
Parameters
bandwidth-value: Maximum available bandwidth, ranging from 1 to 4294967295 (in kbps).
Usage guidelines
The maximum available bandwidth is used by network management to monitor the interface bandwidth
and does not affect the actual bandwidth of the interface. The maximum available bandwidth can be
obtained by querying the ifspeed value from the management information base (MIB) through the
third-party software.
Examples
# Set the maximum available bandwidth to 10000 kbps for Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] bandwidth 10000
# Set the maximum bandwidth to 10000 kbps for RPR physical port RPRPOS 2/1/1.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] bandwidth 10000
description
Use description to set the description of the current RPR logical interface or RPR physical port.
Use undo description to restore the default.
Syntax
description text