R3303-HP HSR6800 Routers High Availability Command Reference

75
Field Descri
p
tion
Ringlet-ID
Binding relationship between the physical port and the RPR logical
interface:
• Ringlet0—The physical port is the west interface.
• Ringlet1—The physical port is the east interface.
• N/A—No binding relationship exists.
Role Role of the physical port. It can be Master, Slave, or N/A.
Mate-Port State of the mate port connected to the physical port.
display rpr defect
Use display rpr defect to display RPR defect information.
Syntax
display rpr defect [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays the RPR defect information of the stations corresponding to
all the RPR logical interfaces on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the ring defect information for RPR logical interface RPR 1.
<Sysname> display rpr defect rpr 1
RPR defects on interface: RPR1
Excess reserved rate defect: ringlet0: 0, ringlet1: 0
Jumbo configuration defect: 0
Maximum number of stations exceeded defect: 0
Miscabling defect: ringlet0: 0, ringlet1: 0
Protection mode configuration defect: 0
Inconsistent topology defect: 0
Topology instability defect: 0
IP address duplicate defect: 0