R3303-HP HSR6800 Routers High Availability Command Reference

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

The protection mode can be configured protection mode and active protection mode. The configured

protection mode is administratively configured but does not necessarily take effect. RPR automatically

checks the protection modes of all the stations to make sure that the same active protection mode is used

on the ring.

Examples

# Display the protection information of Layer 3 RPR logical interface RPR 1.

<Sysname> display rpr protection rpr1

Protection information on interface: RPR1

Configured protection mode: steer

Active protection mode: steer

Protection reversion mode: revertible

Context containment active: 0

Protection state on the west span: sf

Protection state on the east span: sf

Edge state on the west span: edged

Edge state on the east span: edged

Last known neighbour on the west span: 000f-e245-7a43

Last known neighbour on the east span: 000f-e23f-2e80

The number of protections on the west span: 1

The number of protections on the east span: 1

Last protection time on the west span:

Last protection time on the east span:

Protection start time on the west span: 2007.06.12 17:11:43

Protection start time on the east span: 2007.06.12 17:11:43

# Display the protection information of Layer 3 RPR logical interface RPR 2.

<Sysname> display rpr protection rpr2

Protection information on interface: RPR2

Configured protection mode: steer

Protection reversion mode: revertible

NOTE:

For an RPR logical interface not bound with any physical port, this command displays only its protection

mode and protection reversion mode.