R3303-HP HSR6800 Routers High Availability Command Reference

82
display rpr timers
Use display rpr timers to display RPR timers.
Syntax
display rpr timers [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays the RPR timers for all the RPR stations on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the settings of all RPR timers.
<Sysname> display rpr timers
Value of all the timers on interface: RPR1
Fast TP timer: 10 ms
Slow TP timer: 100 ms
Fast TC timer: 10 ms
Slow TC timer: 100 ms
ATD timer: 1 s
WTR timer: 10 s
Holdoff timer: 0 ms
Keepalive timer: 3 ms
Topology stability timer: 40 ms
display rpr topology
Use display rpr topology to display RPR topology information.
Syntax
display rpr topology { all | local | ring | stations } [ summary ] [ rpr interface-number ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view