R3303-HP HSR6800 Routers High Availability Command Reference

3
Default
Version check of the standby MPU is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
Inconsistency of the software version of the active MPU and standby MPU might result in system failure
when the system is running.
A router operating in IRF mode does not support this command. To switch between standalone mode
and IRF mode, use the chassis convert mode irf command.
Examples
# Ignore version check of the standby MPU.
<Sysname> system-view
[Sysname] ha slave-ignore-version-check
slave restart
Use slave restart to manually restart the standby MPU.
Syntax
slave restart
Views
System view
Default command level
2: System level
Usage guidelines
A router operating in IRF mode does not support this command. To switch between standalone mode
and IRF mode, use the chassis convert mode irf command.
Examples
# Restart the standby MPU.
<Sysname> system-view
[Sysname] slave restart
The slave will reset! Continue?[Y/N]:y
slave switchover
Use slave switchover to manually configure the switchover between the active MPU and standby MPU.
Syntax
slave switchover