R3303-HP HSR6800 Routers High Availability Command Reference

90
NOTE:
For an RPR logical interface not bound to any RPR physical port, the display rpr topology local command
displays only the station name and station IP address, and the display rpr topology stations command
displays nothing.
display rpr vrrp-info
Use display rpr vrrp-info to display RPR VRRP standby group information.
Syntax
display rpr vrrp-info [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays the VRRP standby group information of all the RPR stations
on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
For more information about VRRP, see High Availability Configuration Guide.
Examples
# Display VRRP standby group information of RPR.
<Sysname> display rpr vrrp-info
VRRP info on interface: RPR1
Index Virtual-Group Status MAC-Address
--------------------------------------------------
0 N/A N/A N/A
1 N/A N/A N/A
flag
Use flag to set the overhead bytes of the interface.
Use undo flag to restore the default.