R3303-HP HSR6800 Routers High Availability Command Reference

92
undo flag j1 ignore
Default
CRC is performed for the J1 byte.
Views
RPRPOS interface view
Default command level
2: System level
Examples
# Ignore CRC of the J1 byte on interface RPRPOS 2/1/1.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] flag j1 ignore
frame-format
Use frame-format to set the framing format on the interface.
Use undo frame-format to restore the default.
Syntax
frame-format { sdh | sonet }
undo frame-format
Default
The framing format is SDH.
Views
RPRPOS interface view
Default command level
2: System level
Parameters
sdh: Sets the framing format to SDH.
sonet: Sets the framing format to SONET.
Examples
# Set the framing format on interface RPRPOS 2/1/1 to SONET.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] flag j1 ignore
interface rpr
Use interface rpr to create an RPR logical interface and enter RPR logical interface view.
Use undo interface rpr to remove an RPR logical interface.