Manualshelf

R3303-HP HSR6800 Routers Interface Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
21222324252627282930
20
• Ten-GigabitEthernet 1/0/0 and Ten-GigabitEthernet 2/0/0 of Router B are on different SAP-4EXP
modules.
Configure fast forwarding on Router B to improve packet forwarding efficiency.
Figure 4 Network diagram
Configuration procedure
1. Configure Router A:
# Configure an IP address for the interface Ten-GigabitEthernet 1/0/0.
<RouterA> system-view
[RouterA] interface Ten-GigabitEthernet1/0/0
[RouterA] port ilnk-mode route
[RouterA-Ten-GigabitEthernet1/0/0] ip address 11.1.1.1 255.0.0.0
[RouterA-Ten-GigabitEthernet1/0/0] quit
# Configure a static route to Router B.
[RouterA] ip route-static 22.1.1.0 255.0.0.0 11.1.1.2
2. Configure Router C:
# Configure an IP address for the interface Ten-GigabitEthernet 1/0/0.
<RouterC> system-view
[RouterC] interface Ten-GigabitEthernet1/0/0
[RouterC] port ilnk-mode route
[RouterC-Ten-GigabitEthernet1/0/0] ip address 22.1.1.2 255.0.0.0
[RouterC-Ten-GigabitEthernet1/0/0] quit
# Configure a static route to Router B.
[RouterC] ip route-static 11.1.1.0 255.0.0.0 22.1.1.1
3. On Router B, configure fast forwarding and IP addresses for Ten-GigabitEthernet 1/0/0 and
Ten-GigabitEthernet 2/0/0.
<RouterB> system-view
[RouterB] interface Ten-GigabitEthernet1/0/0
[RouterB] port ilnk-mode route
[RouterB-Ten-GigabitEthernet1/0/0] ip fast-forwarding
[RouterB-Ten-GigabitEthernet1/0/0] ip address 11.1.1.2 255.0.0.0
[RouterB-Ten-GigabitEthernet1/0/0] quit
[RouterB] interface Ten-GigabitEthernet2/0/0
[RouterB] port ilnk-mode route
[RouterB-Ten-GigabitEthernet2/0/0] ip fast-forwarding
[RouterB-Ten-GigabitEthernet2/0/0] ip address 22.1.1.1 255.0.0.0
[RouterB-Ten-GigabitEthernet2/0/0] quit
XGE1/0/0
11.1.1.1/8
XGE1/0/0
11.1.1.2/8
XGE2/0/0
22.1.1.1/8
XGE1/0/0
22.1.1.2/8
RouterA
RouterB
RouterC