R3303-HP HSR6800 Routers Interface Configuration Guide

35
Configuring an E1-F interface in framed mode
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter E1-F interface view.
interface serial interface-number N/A
3. Configure the interface to
operate in framed mode.
undo fe1 unframed
Optional.
The default is framed mode.
4. Bundle timeslots on the
interface.
fe1 timeslot-list list
Optional.
If no timeslot range is specified, all
timeslots are bundled by default.
5. Enable RAI detection on the
interface.
fe1 alarm detect rai
Optional.
Enabled by default.
6. Set other interface
parameters.
See "Configuring other E1-F
interface parameters."
Optional.
Configuring an E1-F interface in unframed mode
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter E1-F interface view.
interface serial interface-number N/A
3. Configure the interface to
operate in unframed mode.
fe1 unframed The default is framed mode.
4. Set other interface
parameters.
See "Configuring other E1-F
interface parameters."
Optional.
Configuring other E1-F interface parameters
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter E1-F interface view.
interface serial serial-number N/A
3. Configure the interface
description.
description text
Optional.
By default, the description of an
interface is interface-name
Interface.
4. Set the line code format.
fe1 code { ami | hdb3 }
Optional.
The default is HDB3.