R3303-HP HSR6800 Routers Interface Configuration Guide

67
Displaying and maintaining CPOS interfaces
Task Command Remarks
Display information about
channels on a specified or all
CPOS interfaces.
display controller cpos [ cpos-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified E1 channel on a CPOS
interface.
display controller cpos cpos-number e1
e1-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified T1 channel on a CPOS
interface.
display controller cpos cpos-number t1
t1-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified E3 channel on a CPOS
interface.
display controller cpos cpos-number e3
e3-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified T3 channel on a CPOS
interface.
display controller cpos cpos-number t3
t3-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about an
E1/T1/E3/T3 serial interface.
display interface serial
interface-number/channel-number:set-num
ber [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear the controller counter of a
CPOS interface.
reset counters controller cpos
interface-number
Available in user view.
For more information about the display interface serial command, see Interface Command Reference.
CPOS interface configuration examples
CPOS-E1 interface configuration example
Network requirements
As shown in Figure 15, branch nodes Router B through Router H are uplinked to the central node Router
A through E1 links and Router A aggregate these E1 links with a CPOS interface.
Add one more E1 link on Router B to expand its capacity. In addition, bind the two E1 links through an
MP-group interface.