R3303-HP HSR6800 Routers IP Multicast Command Reference

92
undo igmp timer query
Default
The IGMP general query interval is 60 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an IGMP general query interval (interval for sending IGMP general queries) in
seconds, in the range of 1 to 18000.
Examples
# Set the IGMP general query interval to 125 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] igmp timer query 125
Related commands
• display igmp interface
• igmp timer other-querier-present
• timer query
igmp version
Use igmp version to configure the IGMP version on the current interface.
Use undo igmp version to restore the default IGMP version.
Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is version 2.
Views
Interface view
Default command level
2: System level
Parameters
version-number: Specifies an IGMP version, in the range of 1 to 3.
Examples
# Set the IGMP version to IGMPv1 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1