R3303-HP HSR6800 Routers IP Multicast Command Reference

103
timer query (IGMP view)
Use timer query to configure the IGMP general query interval globally.
Use undo timer query to restore the default.
Syntax
timer query interval
undo timer query
Default
The IGMP general query interval is 60 seconds.
Views
Public network IGMP view, VPN instance IGMP view
Default command level
2: System level
Parameters
interval: Specifies an IGMP general query interval (interval for sending IGMP general queries) in
seconds, in the range of 1 to 18000.
Examples
# Set the IGMP general query interval to 125 seconds on the public network globally.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] timer query 125
# Set the IGMP general query interval to 125 seconds globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] timer query 125
Related commands
• display igmp interface
• igmp timer query
• timer other-querier-present
version (IGMP view)
Use version to configure the IGMP version globally.
Use undo version to restore the default.
Syntax
version version-number
undo version
Default
The IGMP version is IGMPv2.