R3303-HP HSR6800 Routers IP Multicast Command Reference

114
Syntax
c-bsr priority priority
undo c-bsr priority
Default
The C-BSR priority is 64.
Views
Public network PIM view, VPN instance PIM view
Default command level
2: System level
Parameters
priority: Specifies the priority of the C-BSR, in the range of 0 to 255. A larger value means a higher
priority.
Examples
# Set the global C-BSR priority to 5 on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr priority 5
# Set the global C-BSR priority to 5 in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] c-bsr priority 5
Related commands
• c-bsr
• c-bsr global
• c-bsr group
c-rp (PIM view)
Use c-rp to configure the specified interface as a C-RP.
Use undo c-rp to remove the related C-RP configuration.
Syntax
c-rp interface-type interface-number [ group-policy acl-number | priority priority | holdtime hold-interval
| advertisement-interval adv-interval ] * [ bidir ]
undo c-rp interface-type interface-number
Default
No C-RPs are configured.
Views
Public network PIM view, VPN instance PIM view