R3303-HP HSR6800 Routers IP Multicast Command Reference

120
Table 24 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Elected BSR Address Address of the elected BSR.
Candidate BSR Address Address of the candidate BSR.
Priority BSR priority.
Hash mask length Hash mask length.
State BSR state.
Scope Scope of the BSR.
Uptime Length of time for which this BSR has been up, in hh:mm:ss.
Next BSR message scheduled at
Length of time after which the next BSR message is to be sent, in
hh:mm:ss.
Candidate RP Address of the C-RP.
Priority Priority of the C-RP.
HoldTime Timeout time of the C-RP.
Advertisement Interval Interval at which the C-RP sends advertisement messages.
Next advertisement scheduled at
Length of time in which the C-RP will send the next advertisement
message, in hh:mm:ss.
Related commands
• c-bsr
• c-rp
display pim claimed-route
Use display pim claimed-route to display information about unicast routes that PIM uses.
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] claimed-route [ source-address ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
source-address: Specifies a multicast source. If you do not provide this argument, this command displays
information about all unicast routes that PIM uses.