R3303-HP HSR6800 Routers IP Multicast Command Reference

122
display pim control-message counters
Use display pim control-message counters to display the statistics for PIM control messages.
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] control-message counters [ message-type
{ probe | register | register-stop } | [ interface interface-type interface-number | message-type { assert
| bsr | crp | graft | graft-ack | hello | join-prune | state-refresh } ] * ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
probe: Specifies null register messages.
register: Specifies register messages.
register-stop: Specifies register-stop messages.
interface interface-type interface-number: Specifies an interface by its type and number.
assert: Specifies assert messages.
bsr: Specifies bootstrap messages.
crp: Specifies C-RP-Adv messages.
graft: Specifies graft messages.
graft-ack: Specifies graft-ack messages.
hello: Specifies hello messages.
join-prune: Specifies join/prune messages.
state-refresh: Specifies state refresh messages.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the related information on the
public network.