R3303-HP HSR6800 Routers IP Multicast Command Reference

132
Field Descri
p
tion
Bidirectional PIM Whether BIDIR-PIM is enabled.
display pim routing-table
Use display pim routing-table to display PIM routing table information.
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] routing-table [ group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] | incoming-interface
[ interface-type interface-number | register ] | outgoing-interface { include | exclude | match }
{ interface-type interface-number | register } | mode mode-type | flags flag-value | fsm ] * [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
source-address: Specifies a multicast source address.
mask: Specifies the address mask, 255.255.255.255 by default.
mask-length: Specifies the mask length of the multicast group/source address, in the range of 0 to 32.
The default is 32.
incoming-interface: Specifies an incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies a register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Specifies an outgoing interface.
include: Specifies an interface in the outgoing interface list.
exclude: Specifies an interface not in the outgoing interface list.
match: Specifies an interface that only exists in the outgoing interface list.
mode mode-type: Specifies a PIM mode, where mode-type can have the following values:
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
flags flag-value: Specifies a flag. The values of flag-value and their meanings are as follows: