R3303-HP HSR6800 Routers IP Multicast Command Reference

133
• 2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP
peer.
• act: Specifies PIM routing entries that have been used for routing data.
• bidir: Specifies PIM routing entries created by BIDIR-PIM.
• del: Specifies PIM routing entries scheduled to be deleted.
• exprune: Specifies PIM routing entries containing outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries containing outgoing interfaces provided by other multicast routing
protocols.
• loc: Specifies PIM routing entries on the devices that directly connect to the same subnet as the
multicast source.
• msdp: Specifies PIM routing entries learned from MSDP SA messages.
• niif: Specifies PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor searching failure.
• rpt: Specifies PIM routing entries on RPT branches where (S, G) prunes have been sent to the RP.
• rq: Specifies PIM routing entries of the receiving side of the switch-MDT switchover.
• spt: Specifies PIM routing entries on the SPT.
• sq: Specifies PIM routing entries of the originator side of switch-MDT switchover.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies wildcard routing entries.
fsm: Displays detailed information about the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays PIM routing table information
on the public network.
Examples
# Display PIM routing table information on the public network.
<Sysname> display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(172.168.0.12, 227.0.0.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: GigabitEthernet2/1/1
Upstream neighbor: NULL