R3303-HP HSR6800 Routers IP Multicast Command Reference

3
Field Description
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port:
• In standalone mode, to display the remaining time of a non-aggregate
port, you must specify the number of the slot where the corresponding
card resides by using the slot slot-number option. For an aggregate
interface, you do not need to do this.
• In IRF mode, to display the remaining time of a non-aggregate port
that does not belong to the MPU, you must specify the IRF member
device ID and the slot number of the card by using the chassis
chassis-number slot slot-number option. For an aggregate port, you do
not need to do this.
IP group address Address of IP multicast group.
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 implies any multicast source.
MAC group address Address of MAC multicast group.
Attribute Attribute of IP multicast group.
Host port unit board Mask indicating a board with a member port residing on it.
Host port(s) Number of member ports.
display igmp-snooping host
Use display igmp-snooping host to display information about the hosts tracked by IGMP snooping.
Syntax
In standalone mode:
display igmp-snooping host vlan vlan-id group group-address [ source source-address ] [ slot
slot-number ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display igmp-snooping host vlan vlan-id group group-address [ source source-address ] [ chassis
chassis-number slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
group group-address: Displays information about the hosts tracked by IGMP snooping that are in the
specified IGMP snooping group. The value range for the group-address argument is 224.0.1.0 to
239.255.255.255.
source source-address: Displays information about the hosts tracked by IGMP snooping that are in the
specified multicast source, where source-address is a valid unicast address or 0.0.0.0. A source IP
address of 0.0.0.0 specifies all multicast sources.