R3303-HP HSR6800 Routers IP Multicast Command Reference

142
Related commands
• holdtime join-prune
• pim holdtime assert
• pim holdtime join-prune
holdtime join-prune (PIM view)
Use holdtime join-prune to configure the global value of the join/prune timeout timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune interval
undo holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Public network PIM view, VPN instance PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds, in the range of 1 to 65535.
Examples
# Set the global value of the join/prune timeout timer to 280 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
# Set the global value of the join/prune timeout timer to 280 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] holdtime join-prune 280
Related commands
• holdtime assert
• pim holdtime assert
• pim holdtime join-prune
jp-pkt-size (PIM view)
Use jp-pkt-size to configure the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size packet-size