R3303-HP HSR6800 Routers IP Multicast Command Reference

150
undo pim hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds, in the range of 1 to 65535.
Examples
# Set the prune override interval to 2,000 milliseconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim hello-option override-interval 2000
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim hello-option lan-delay
pim holdtime assert
Use pim holdtime assert to configure the assert timeout timer on the current interface.
Use undo pim holdtime assert to restore the default.
Syntax
pim holdtime assert interval
undo pim holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds, in the range of 7 to 2147483647.
Examples
# Set the assert timeout timer to 100 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim holdtime assert 100