R3303-HP HSR6800 Routers IP Multicast Command Reference

155
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a hello interval in seconds, in the range of 1 to 2147483647.
Examples
# Set the hello interval to 40 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim timer hello 40
Related commands
timer hello
pim timer join-prune
Use pim timer join-prune to configure the interval at which join/prune messages are sent on the current
interface.
Use undo pim timer join-prune to restore the default.
Syntax
pim timer join-prune interval
undo pim timer join-prune
Default
The join/prune interval is 60 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a join/prune interval in seconds, in the range of 1 to 2147483647.
Examples
# Set the join/prune interval to 80 seconds on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim timer join-prune 80
Related commands
timer join-prune