R3303-HP HSR6800 Routers IP Multicast Command Reference

160
[Sysname-pim] register-whole-checksum
# Configure the router to calculate the checksum based on the entire register message in VPN instance
mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] register-whole-checksum
Related commands
• register-policy
• register-suppression-timeout
reset pim control-message counters
Use reset pim control-message counters to reset PIM control message counters.
Syntax
reset pim [ all-instance | vpn-instance vpn-instance-name ] control-message counters [ interface
interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
interface interface-type interface-number: Specifies an interface by its type and number. If no interface is
specified, this command clears the statistics for PIM control messages on all interfaces.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command resets PIM control message counters
on the public network.
Examples
# Reset PIM control message counters on all interfaces on the public network.
<Sysname> reset pim control-message counters
source-lifetime (PIM view)
Use source-lifetime to configure the multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime interval
undo source-lifetime