R3303-HP HSR6800 Routers IP Multicast Command Reference

164
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 232.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] ssm-policy 2000
# Configure the SSM group range to be 232.1.0.0/16 in VPN instance mvpn.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 232.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] ssm-policy 2000
state-refresh-interval (PIM view)
Use state-refresh-interval to configure the interval between state refresh messages.
Use undo state-refresh-interval to restore the default.
Syntax
state-refresh-interval interval
undo state-refresh-interval
Default
The state refresh interval is 60 seconds.
Views
Public network PIM view, VPN instance PIM view
Default command level
2: System level
Parameters
interval: Specifies a state refresh interval in seconds, in the range of 1 to 255.
Examples
# Set the state refresh interval to 70 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] state-refresh-interval 70
# Set the state refresh interval to 70 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] state-refresh-interval 70
Related commands
• pim state-refresh-capable
• state-refresh-rate-limit
• state-refresh-ttl