R3303-HP HSR6800 Routers IP Multicast Command Reference

6
dot1p-priority (IGMP-snooping view)
Use dot1p-priority to set the 802.1p precedence for IGMP messages globally.
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority priority-number
undo dot1p-priority
Default
The 802.1p precedence for IGMP messages is 0.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for IGMP messages, in the range of 0 to 7. A higher
number indicates a higher precedence.
Examples
# Set the 802.1p precedence for IGMP messages to 3 globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] dot1p-priority 3
entry-limit (IGMP-snooping view)
Use entry-limit to set the global maximum number of IGMP snooping forwarding entries.
Use undo entry-limit to restore the default.
Syntax
entry-limit limit
undo entry-limit
Default
The maximum number is 1000.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of IGMP snooping forwarding entries, in the range of 0 to 1000.