R3303-HP HSR6800 Routers IP Multicast Command Reference

170
MSDP configuration commands
cache-sa-enable
Use cache-sa-enable to enable the SA cache mechanism to cache the (S, G) entries contained in SA
messages.
Use undo cache-sa-enable to disable the SA cache mechanism.
Syntax
cache-sa-enable
undo cache-sa-enable
Default
The SA cache mechanism is enabled. That is, the device caches the (S, G) entries that the received SA
messages contain.
Views
Public network MSDP view, VPN instance MSDP view
Default command level
2: System level
Examples
# Enable the SA message cache mechanism on the public network, so that the device caches the (S, G)
entries that the received SA messages contain.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] cache-sa-enable
# Enable the SA message cache mechanism in VPN instance mvpn, so that the device caches the (S, G)
entries contained in the received SA messages.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] cache-sa-enable
display msdp brief
Use display msdp brief to display brief information about MSDP peers.
Syntax
display msdp [ all-instance | vpn-instance vpn-instance-name ] brief [ state { connect | down | listen |
shutdown | up } ] [ | { begin | exclude | include } regular-expression ]
Views
Any view