R3303-HP HSR6800 Routers IP Multicast Command Reference

171
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
state: Specifies a state.
connect: Specifies the connecting state.
down: Specifies the down state.
listen: Specifies the listening state.
shutdown: Specifies the terminated state.
up: Specifies the in-session state.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays brief information about MSDP
peers on the public network.
Examples
# Display brief information about MSDP peers in all states on the public network.
<Sysname> display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
20.20.20.20 Up 00:00:13 100 0 0
Table 35 Command output
Field Descri
p
tion
MSDP Peer Brief Information of
VPN-Instance: public net
Brief information of MSDP peers on the public network.
Configured Number of MSDP peers configured.
Up Number of MSDP peers in the up state.
Listen Number of MSDP peers in listening state.
Connect Number of MSDP peers in connecting state.
Shutdown Number of MSDP peers in shutdown state.