R3303-HP HSR6800 Routers IP Multicast Command Reference

172
Field Descri
p
tion
Down Number of MSDP peers in down state.
Peer's Address MSDP peer address.
State
MSDP peer status:
• Up—A session is set up and the MSDP peer is in session.
• Listen— A session is set up, and the local device serves as the
server in listening state.
• Connect—A session is not set up and the local device serves as a
client in connecting state.
• Shutdown—Deactivated.
• Down—Connection failed.
Up/Down time
Length of time since the MSDP peer connection was
established/failed.
AS
Number of the AS where the MSDP peer is located. A question mark
(?) means that the system could not obtain the AS number.
SA Count Number of (S, G) entries.
Reset Count MSDP peer connection reset times.
display msdp peer-status
Use display msdp peer-status to display detailed MSDP peer status information.
Syntax
display msdp [ all-instance | vpn-instance vpn-instance-name ] peer-status [ peer-address ] [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
peer-address: Specifies an MSDP peer by its address. If you do not provide this argument, this command
displays the detailed status information of all MSDP peers.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.