R3303-HP HSR6800 Routers IP Multicast Command Reference

177
Field Descri
p
tion
Expires
Length of time in which the cached (S, G) entry will expire, in
hours:minutes:seconds.
Related commands
cache-sa-enable
display msdp sa-count
Use display msdp sa-count to display the number of (S, G) entries in the SA cache.
Syntax
display msdp [ all-instance | vpn-instance vpn-instance-name ] sa-count [ as-number ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
as-number: Specifies an AS number in the range of 1 to 4294967295.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the number of (S, G) entries
in the SA cache on the public network.
This command gives the corresponding output only after the cache-sa-enable command is executed.
Related commands
cache-sa-enable
Examples
# Display the number of (S, G) entries in the SA cache on the public network.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information of VPN-Instance: public net
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA