R3303-HP HSR6800 Routers IP Multicast Command Reference

180
<Sysname> system-view
[Sysname] acl number 3101
[Sysname-acl-adv-3101] rule permit ip source 10.10.0.0 0.0.255.255 destination 225.1.0.0
0.0.255.255
[Sysname-acl-adv-3101] quit
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] import-source acl 3101
Related commands
peer sa-policy
msdp
Use msdp to enable MSDP on the public network or the specified VPN instance and enter public network
MSDP view or VPN instance MSDP view.
Use undo msdp to disable MSDP on the public network or the specified VPN instance and remove the
configurations in public network MSDP view or VPN instance MSDP view to free the resources that MSDP
occupies.
Syntax
msdp [ vpn-instance vpn-instance-name ]
undo msdp [ vpn-instance vpn-instance-name ]
Default
MSDP is disabled.
Views
System view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify this option, the command applies to the public network.
Usage guidelines
You must enable IP multicast in the corresponding VPN instance before you use this command.
Examples
# Enable IP multicast routing on the public network, and enable MSDP on the public network to enter
public network MSDP view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] msdp
[Sysname-msdp]
# Enable IP multicast routing in VPN instance mvpn, and enable MSDP in VPN instance mvpn to enter
MSDP view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn