R3303-HP HSR6800 Routers IP Multicast Command Reference

181
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn]
Related commands
multicast routing-enable
originating-rp
Use originating-rp to configure the address of the specified interface as the RP address of SA messages.
Use undo originating-rp to restore the default.
Syntax
originating-rp interface-type interface-number
undo originating-rp
Default
The PIM RP address is used as the RP address of SA messages.
Views
Public network MSDP view, VPN instance MSDP view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Specify the IP address of GigabitEthernet 2/1/1 as the RP address of SA messages on the public
network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] originating-rp gigabitethernet 2/1/1
# Specify the IP address of GigabitEthernet 2/1/1 as the RP address of SA messages in VPN instance
mvpn.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] originating-rp gigabitethernet 2/1/1
peer connect-interface
Use peer connect-interface to create an MSDP peer connection.
Use undo peer connect-interface to remove an MSDP peer connection.
Syntax
peer peer-address connect-interface interface-type interface-number