R3303-HP HSR6800 Routers IP Multicast Command Reference

192
Views
Public network MSDP view, VPN instance MSDP view
Default command level
2: System level
Parameters
peer-address: Specifies an MSDP peer.
Examples
# Terminate the connection with the MSDP peer 125.10.7.6 on the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] shutdown 125.10.7.6
# Terminate the connection with the MSDP peer 125.10.7.6 in VPN instance mvpn.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] shutdown 125.10.7.6
Related commands
display msdp peer-status
static-rpf-peer
Use static-rpf-peer to configure a static RPF peer.
Use undo static-rpf-peer to remove a static RPF peer.
Syntax
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
undo static-rpf-peer peer-address
Default
No static RPF peer is configured.
Views
Public network MSDP view, VPN instance MSDP view
Default command level
2: System level
Parameters
peer-address: Specifies an MSDP peer.
rp-policy ip-prefix-name: Specifies a filtering policy based on the RP address in SA messages, where
ip-prefix-name is the filtering policy name, a case-sensitive string of 1 to 19 characters.
Usage guidelines
When you configure multiple static RPF peers, follow these guidelines:
• If you use the rp-policy keyword for all the static RPF peers, all the static RPF peers take effect
concurrently. SA messages are filtered as per the configured prefix list and only those SA messages
whose RP addresses pass the filtering are accepted. If multiple static RPF peers use the same filtering