R3303-HP HSR6800 Routers IP Multicast Command Reference

9
host-aging-time (IGMP-snooping view)
Use host-aging-time to set the aging timer for the dynamic member ports globally.
Use undo host-aging-time to restore the default.
Syntax
host-aging-time interval
undo host-aging-time
Default
The aging timer of the dynamic member ports is 260 seconds.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interval: Specifies an aging time in seconds for dynamic member ports, in the range of 200 to 1000.
Usage guidelines
For a router that supports both IGMP snooping and IGMP and is installed with the SAP module, this
command takes effects only on IGMP snooping-enabled VLANs but not on VLANs with IGMP-enabled
VLAN interfaces.
Examples
# Set the aging timer for the dynamic member ports to 300 seconds globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] host-aging-time 300
Related commands
igmp-snooping host-aging-time
host-tracking (IGMP-snooping view)
Use host-tracking to enable the IGMP snooping host tracking function globally.
Use undo host-tracking to disable the IGMP snooping host tracking function globally.
Syntax
host-tracking
undo host-tracking
Default
This function is disabled.
Views
IGMP-snooping view