R3303-HP HSR6800 Routers IP Multicast Command Reference

205
Field Description
State
Route state:
• Active.
• Inactive.
• Adv—Can be advertised.
• NoAdv—Cannot be advertised.
• GotQ—Route recursion succeeded.
• WaitQ—Route recursion has not succeeded yet.
Age
Age of the route, in the sequence of hour, minute, and
second from left to right.
Tag Route tag.
display ip multicast routing-table ip-address
Use display ip multicast routing-table ip-address to display information about multicast routes to a
specified destination address.
Syntax
display ip multicast routing-table ip-address [mask-length |mask ] [ longer-match ] [ verbose ] [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
2: Monitor level
Parameters
ip-address: Specifies a destination IP address, in dotted decimal format.
mask-length: Specifies a mask length in the range of 0 to 32.
mask: Specifies a mask in dotted decimal format.
longer-match: Displays the route with the longest mask.
verbose: Displays detailed information about both active and inactive routes. With this argument absent,
the command displays only brief information about active routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Executing the command with different parameters yields different outputs, as follows:
display ip multicast routing-table ip-address