R3303-HP HSR6800 Routers IP Multicast Command Reference

207
Destination: 169.0.0.0/8
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 169.1.1.1 Interface: GigabitEthernet2/1/1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 00h00m32s
Tag: 0
For more information about the fields, see Table 41.
display bgp multicast group
Use display bgp multicast group to display IPv4 MBGP peer group information.
Syntax
display bgp multicast group [ group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: Monitor level
Parameters
group-name: Specifies an MBGP peer group by its name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the IPv4 MBGP peer group aaa.
<Sysname> display bgp multicast group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0