R3303-HP HSR6800 Routers IP Multicast Command Reference

208
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 200 0 0 0 0 00:00:35 Active
Table 42 Command output
Field Description
BGP peer-group Name of the peer group.
Remote AS AS number of the peer group.
Type Type of the peer group: IBGP or EBGP.
Maximum allowed prefix number Maximum allowed prefix number.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group;
If the percentage is reached, the system generates alarm
messages.
Configured hold timer value Holdtime interval.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisement.
Peer Preferred Value Preferred value specified for the routes from the peer.
No routing policy is configured No routing policy is configured.
Members Detailed information about the members in the peer group.
Peer IPv4 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down Time elapsed.
State State machine of the peer.
display bgp multicast network
Use display bgp multicast network to display IPv4 MBGP routing information advertised with the
network command.
Syntax
display bgp multicast network [ | { begin | exclude | include } regular-expression ]
Views
Any view