R3303-HP HSR6800 Routers IP Multicast Command Reference

213
Field Description
Negotiated: send
Negotiation result: The local BGP router can send
router-refresh messages that carry the ORF information, and
the peer can receive route-refresh messages that carry the
ORF information.
• If receive is displayed, the local BGP router can receive
router-refresh messages that carry the ORF information,
and the peer can send route-refresh messages that carry
the ORF information.
• If both send and receive are displayed, the local BGP
router and the peer can both send and receive
route-refresh messages that carry the ORF information.
• This field is not displayed if neither the send nor the
receive capability is supported.
• This field is displayed only after the ORF capability is
enabled for the BGP peer.
Peer Preferred Value Preferred value specified for the routes from the peer.
BFD Status of BGP (enabled/disabled).
Routing policy configured Local routing policy.
display bgp multicast peer received ip-prefix
Use display bgp multicast peer received ip-prefix to display the prefix entries in the ORF information for
the specified BGP peer.
Syntax
display bgp multicast peer ip-address received ip-prefix [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies a BGP peer by its IP address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the prefix information received from the BGP peer 10.110.25.20.
<Sysname> display bgp multicast peer 10.110.25.20 received ip-prefix