R3303-HP HSR6800 Routers IP Multicast Command Reference

223
Usage guidelines
If no parameter is specified, this command displays all IPv4 MBGP route flap statistics.
Examples
# Display IPv4 MBGP route flap statistics.
<Sysname> display bgp multicast routing-table flap-info
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
Network From Flaps Duration Reuse Path/Origin
*> 55.0.0.0 12.1.1.1 2 00:00:16 100?
*d 77.0.0.0 12.1.1.1 5 00:34:02 00:27:08 100?
Table 50 Command output
Field Description
From Source IP address of the route.
Flaps Number of routing flaps.
Duration Route flap duration.
Reuse Reuse time of the route.
For more information about the fields, see Table 47.
display bgp multicast routing-table peer
Use display bgp multicast routing-table peer to display IPv4 MBGP routing information advertised to or
received from the specified IPv4 MBGP peer.
Syntax
display bgp multicast routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: Monitor level
Parameters
ip-address: Specifies an IPv4 MBGP peer by its IP address.
advertised-routes: Specifies the advertised routes.
received-routes: Specifies the received routes.
network-address: Specifies the IP address of the destination network.