R3303-HP HSR6800 Routers IP Multicast Command Reference

224
mask: Specifies the mask of the destination network, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.
statistic: Specifies route statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IPv4 MBGP routing information advertised to the peer 20.20.20.1.
<Sysname> display bgp multicast routing-table peer 20.20.20.1 advertised-routes
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 30.30.30.0/24 0.0.0.0 0 0 i
*> 40.40.40.0/24 0.0.0.0 0 0 i
For more information about the fields, see Table 47.
Related commands
display bgp multicast peer
display bgp multicast routing-table regular-expression
Use display bgp multicast routing-table regular-expression to display IPv4 MBGP routing information
that matches the specified AS path regular expression.
Syntax
display bgp multicast routing-table regular-expression as-regular-expression
Views
Any view
Default command level
2: Monitor level
Parameters
as-regular-expression: Specifies an AS path regular expression, a case-sensitive string of 1 to 80
characters, including spaces.