R3303-HP HSR6800 Routers IP Multicast Command Reference

235
peer enable (MBGP address family view)
Use peer enable to enable the specified MBGP peer or peer group.
Use undo peer enable to disable the specified MBGP peer or peer group.
Syntax
peer { group-name | ip-address } enable
undo peer { group-name | ip-address } enable
Views
IPv4 MBGP address family view
Default command level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
Usage guidelines
If a peer is disabled, the router does not exchange routing information with the peer.
Examples
# Enable the peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 as-number 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer 18.10.0.9 enable
peer filter-policy (MBGP address family view)
Use peer filter-policy to configure an ACL-based filter policy for a peer or peer group.
Use undo peer filter-policy to remove the filtering.
Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import }
Default
No ACL-based filter policy is configured for a peer or peer group.
Views
IPv4 MBGP address family view
Default command level
2: System level