R3303-HP HSR6800 Routers IP Multicast Command Reference

236
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
acl-number: Specifies an ACL number in the range of 2000 to 3999.
export: Specifies the outbound direction.
import: Specifies the inbound direction.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter routes sent to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test filter-policy 2000 export
Related commands
peer as-path-acl
peer group (MBGP address family view)
Use peer group to add an IPv4 MBGP peer to an IPv4 MBGP peer group.
Use undo peer group to delete a specified peer from a peer group.
Syntax
peer ip-address group group-name
undo peer ip-address group group-name
Default
No peer is added into a peer group.
Views
IPv4 MBGP address family view
Default command level
2: System level
Parameters
ip-address: Specifies an IPv4 MBGP peer by its IP address.
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
Examples
# In IPv4 MBGP address family view, add the peer 10.1.1.1 to the multicast EBGP peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200